Packard Bell B3 Manuel d'utilisateur

Packard BellEasyNote B3Disassembly Manual

9Picture 11. Bottom Base ScrewsPicture 12. Glide Pad Flat CablePicture 13. Main Board Screws Under Keyboard Cover

10Picture 14. Main Board ScrewsTranslation BoardThe translation board is a small PCB with a USB, VGA-Out and AC adapter connector. Toremove it, perfor

11Picture 15. LCD SwitchLCD Screen DisassemblyLCD Lid AssemblyTo remove the LCD lid assembly, perform the following steps:1. Remove the keyboard top

12Picture 16. LCD BezelInverter BoardTo remove the inverter board, perform the following steps:1. Unplug the cable on the inverter board.2. Remove t

133. Gently lift out the LCD panel.4. Remove the remaining 2 screws on each side of the LCD panel to remove thebrackets.Wireless AntennaTo remove th

14Packard Bell EasyNote B3 Disassembly ManualNoticeThe information in this guide is subject to change without notice.This guide contains information p

1Packard Bell EasyNote B3 Disassembly ManualTable of ContentsOverview...

2Packard Bell EasyNote B3 Disassembly ManualOverviewThis document contains step-by-step disassembly instructions for the EasyNote B3 chassis. Theinstr

3Packard Bell EasyNote B3 Disassembly ManualHazardous VoltageThere is hazardous voltage present inside thecomputer when it is connected to an AC suppl

4Packard Bell EasyNote B3 Disassembly ManualSystem DisassemblyHDDTo remove the HDD, perform the following steps:1. Remove the HDD cover (2 screws mar

5Picture 2. Power Cable of Heat Sink AssemblyPicture 3. Heat Sink Assembly ScrewsWiFi LAN Adapter (Mini PCI)To remove the Wireless LAN Adapter (mini P

6Picture 4. WLAN Mini PCI Adapter and AntennaNote: The WLAN card has 2 connectors: MAIN and AUX. Please be sure to connect theantenna to the MAIN conn

7Picture 7. Keyboard Flat CableSpeakersTo remove the speakers, perform the following steps:1. Remove the keyboard cover as described in the chapter K

8Picture 10. Right Speaker ConnectorLCD Screen AssemblyTo remove the LCD screen assembly, perform the following steps:1. Remove the keyboard top cove